FS32K146HAT0MLQT IC MCU 32BIT 1MB FLASH 144LQFP NXP Semiconductors
FS32K146HAT0MLQT
Key Features
Operating characteristics – Voltage range: 2.7 V to 5.5 V – Ambient temperature range: -40 °C to 105 °C for HSRUN mode, -40 °C to 150 °C for RUN mode • Arm™ Cortex-M4F/M0+ core, 32-bit CPU – Supports up to 112 MHz frequency (HSRUN mode) with 1.25 Dhrystone MIPS per MHz – Arm Core based on the Armv7 Architecture and Thumb®-2 ISA – Integrated Digital Signal Processor (DSP) – Configurable Nested Vectored Interrupt Controller (NVIC) – Single Precision Floating Point Unit (FPU) • Clock interfaces – 4 - 40 MHz fast external oscillator (SOSC) with up to 50 MHz DC external square input clock in external clock mode – 48 MHz Fast Internal RC oscillator (FIRC) – 8 MHz Slow Internal RC oscillator (SIRC) – 128 kHz Low Power Oscillator (LPO) – Up to 112 MHz (HSRUN) System Phased Lock Loop (SPLL) – Up to 20 MHz TCLK and 25 MHz SWD_CLK – 32 kHz Real Time Counter external clock
Power management
Low-power Arm Cortex-M4F/M0+ core with excellent energy efficiency . Power Management Controller (PMC) with multiple power modes: HSRUN, RUN, STOP, VLPR, and VLPS. Note: CSEc (Security) or EEPROM writes/ erase will trigger error flags in HSRUN mode (112 MHz) because this use case is not allowed to execute simultaneously. The device will need to switch to RUN mode (80 MHz) to execute CSEc (Security) or EEPROM writes/erase. Clock gating and low power operation supported on specific peripherals
Memory and memory interfaces
Up to 2 MB program flash memory with ECC – 64 KB FlexNVM for data flash memory with ECC and EEPROM emulation. Note: CSEc (Security) or EEPROM writes/erase will trigger error flags in HSRUN mode (112 MHz) because this use case is not allowed to execute simultaneously. The device will need to switch to RUN mode (80 MHz) to execute CSEc (Security) or EEPROM writes/erase. – Up to 256 KB SRAM with ECC – Up to 4 KB of FlexRAM for use as SRAM or EEPROM emulation – Up to 4 KB Code cache to minimize performance impact of memory access latencies – QuadSPI with HyperBus™ support
Product parameters
| types of | describe |
| category | Integrated Circuit (IC) |
| manufacturer | NXP USA Inc |
| series | S32K |
| package | tray |
| Core processor | ARM® Cortex®-M4F |
| Kernel specifications | 32-bit single core |
| speed | 80MHz |
| Connectivity | CANbus,FlexIO,I²C,LINbus,SPI,UART/USART |
| peripheral | POR,PWM,WDT |
| I/O count | 128 |
| Program storage capacity | 1MB(1M x 8) |
| Program Memory Type | flash memory |
| EEPROM capacity | 4K x 8 |
| RAM size | 128K x 8 |
| Voltage Supply (Vcc/Vdd) | 2.7V ~ 5.5V |
| converter | A/D 24x12b SAR; D/A1x8b |
| Oscillator Type | internal |
| operation temperature | -40°C ~ 125°C(TA) |
| Packaging/Housing | 144-LQFP |
Product image
| Image | Part # | Description | |
|---|---|---|---|
|
|
LPC1768FBD100K IC MCU 32BIT 512KB FLASH 100LQFP |
ARM ® Cortex ®- M3 LPC17xx microcontroller IC 32-bit single core100MHz 512KB (512K x 8) Flash 100-LQFP
|